ObjectiveTo review the current status and progress of locking plate for the treatment of distal femoral comminuted fractures.MethodsThe related literature was extensively reviewed to summarize the current status and progress in the treatment of distal femoral comminuted fracture with locking plate from four aspects: the current treatment situation, the shortcomings of locking plate and countermeasures, the progress of locking technology, locking plate and digital orthopedic technology.ResultsTreatment of distal femoral comminuted fractures is challenging. Locking plates, the most commonly used fixation for distal femoral comminuted fractures, still face a high rate of treatment failure. Double plates can improve the mechanical stability of comminuted fractures, but specific quantitative criteria are still lacking for when to choose double plates for fixation. The far cortial locking screw has shown good application value in improving the micro-movement and promoting the growth of callus. The biphasic plating is a development of the traditional locking plate, but needs further clinical examination. As an auxiliary means, digital orthopedic technology shows a good application prospect.ConclusionThe inherent defect of locking plate is a factor that affects the prognosis of distal femoral comminuted fracture. The optimization of locking technology combined with digital orthopedic technology is expected to reduce the failure rate of treatment of distal femoral comminuted fracture.
To investigate the therapeutic effects and the related factors during operation of the less invasive stabilization systemdistal femur（LISSDF）for Types 33A3, C2 and C3 fractures classfied on the criteria by Association of Orthopedics (AO). Methods From August 2004 to December 2005, 26 patients with distal femoral fractures were surgically treated by LISSDF, including 9 patients with Type 33A3, 11 with Type 33C2, and 6 with Type 33C3. There were 15 males and 11 females, aged 3272 years (average, 55 years). The fractures occurred on the left side in 16 patients and on the right side in 10 patients. The fractures resulted from a road traffic accident in12 patients, a fall from the height in 9, and a crush injury in 5. Of the 26 patients, 3 had an open fracture (2 Gustilo Type Ⅰ,1 Gustilo Type ⅡA), with the mean time between the injury and the operation of 4 days (range, 6 h16 d).The operation through a lateral parapatellar incision and a transarticular retrograde plate of osteosynthesis (TARPO) was performed on 17 patients for Type33C2 and 33C3 fracture of the distal femur. The locking head screw (LHS) insertion through the stab incisions and monocortical fixation was performed on 9 patients for Type 33A3 fracture. Results The followup of all the patients for 12-26 months averaged 14.5 months revealed that the bone union was completed in all the 26 patients, 1 of whom had a delayed bone union. The X-ray films showed that the time for the bone union was 1136 weeks averaged 16.1weeks, and the time for the full weight loading was 1326 weeks averaged 17.6 weeks. Superficial infection developed in 1 patient, and the infection was curedafter the dressing changes. The internal fixator attachment was performed on 5 patients 613 months after operation, who had a serious pain in the lateral part of the distal femur. No deep infection，loosening of the internal fixation，breakage or failure of the implants was found in all the patients. Evaluated by the Merchant score system for the knee joint, of the 26 patients 13 achieved an excellent result, 11 achieved a good result, and 2 achieved a fair result, with 92.3% excellent and good results. Based on the Rasmussen criteria for the fracture reduction, the 26 patients had standard scores of 1219 with an average of 17.6; of the 26 patients, 16 had an excellent result, 9 had a good result, and 1 had a fair result. Conclusion The LISS is consistent with the principles of biological osteosynthesis on the design, and the system offers a new and effective internal fixation method for treatment of AO Types A3, C2 and C3 fractures. However, its operation indications and operating instructions should be strictly followed.
ObjectiveTo investigate the effectiveness of rotationplasty in treating osteosarcoma of distal femur in children.MethodsA clinical data of 10 children with osteosarcoma of distal femur treated with rotationplasty between March 2014 and June 2016 was retrospectively analyzed. There were 7 boys and 3 girls with an average age of 6.7 years (range, 4-10 years). There were 4 cases of osteoblastic osteosarcoma, 4 cases of mixed osteosarcoma, and 2 cases of chondroblastic osteosarcoma. All children were staged as Enneking stage ⅡB. The disease duration ranged from 3.5 to 6.0 months (mean, 4.6 months). The lower limb functional scoring system of 1993 Musculoskeletal Tumor Society (MSTS93), Toronto Extremity Salvage Score (TESS), and knee mobility were used to evaluate postoperative function. Tumor recurrence and metastases were monitored by radiograph.ResultsPoor superficial incision healing occurred in 1 patient, and healed after dressing change. The other incisions healed by first intention. All children were followed up 24-72 months (mean, 52.6 months). No local recurrence was observed during follow-up. Three of the ten patients suffered from metastases including 1 dying of multiple organ dysfunction syndrome, 1 alive with tumor, and 1 tumor free survival. Painful callosities and ulcers which related to prosthetic wear occurred in 2 patients and turned up after optimizing prosthetic fit and physiotherapy. The fracture healing time was 2.5-5.0 months (mean, 3.5 months). All children could walk independently at 4 months postoperatively. At last follow-up, the MSTS93 score was 19-25 (mean, 22) and the TESS score was 87-93 (mean, 90). The extension of knee joint mobility with artificial limbs was 0°-10° (mean, 5°), and the flexion of knee joint mobility with artificial limbs was 85°-95° (mean, 90.5°).ConclusionRotationplasty in treating osteosarcoma of distal femur in children with limb salvage difficulties can effectively preserve the limb function and improve the quality of life, and it can be used as an alternative to amputation.
Objective To study the clinical outcome of comminuted factures at distal femur and proximal tibia treated with AO less invasive stabilization systems (LISS). Methods The clinical data of 14 cases of distal femoral fracture and proximal tibial fracture from September 2003 to May 2005 were analyzed retrospectively. The injury was caused by traffic accident in 9 cases, by fall in 3 cases and by slipping in 2 cases. Of 14 cases, there were 5 open fractures and 9 close fractures, including 5 cases of distal femoral comminuted fracture and 9 cases of proximal shaft comminuted fractures. According to AO/OTA classification, the fractures were classified as 33C2 in 3 cases，33C3 in 2 cases,41A2 in 2 cases，41A3 in 2 cases，41B2 in 3 cases and 41C2 in 2 cases. All patients were treated by the internal fixation with LISS-distal femur or with LISS-proximal tibia. Healing of wounds, the X-ray films before and after operations, and therecovery of joint function were observed. Results The patients were followed up from 1 month to 20 months (11 months on average). Twelve cases achieved solid osseous unions from 3 months to 5 months postoperativly; 2 cases had a good reduction and recovered smoothly 2-3 months postoperatively. The results were excellent in 10 cases, good in 3 cases and fair in 1 case according to Johner-Wruhs knee scoring. The range of knee flexion-extension was 110-130° in 11 cases, 100° in 2 cases and 80° in 1 case. Conclusion LISS is an effective method of internal fixation for treating comminntedfracture of distal femur or proximal tibia. It has the advantages of less injury, satisfied reduction and reliable fixation.
Objective To investigate the efficacy of double-plating fixation via U-shaped incision in the treatment of type C3.3 distal femoral fractures. Methods From July 2006 to February 2009, 11 cases of type C3.3 distal femoral fractures were treated, including 5 open fractures and 6 closed fractures. Among them, there were 7 males and 4 females with an averageage of 43 years (range, 27-55 years). The locations were left side in 6 cases and right side in 5 cases. Fracture was caused by traffic accident in 8 cases and fall ing from height in 3 cases. The time from injury to hospital ization was 30 minutes to 7 days. After bone traction for 3 to 8 days, the operations were performed by double-plating fixation via U-shaped incision, and autograft of il iac bone or allogeneic bone grafting. Results The average time of operation was 128 minutes (range, 105-150 minutes). The average blood loss during operation was 344 mL (range, 290-380 mL). Shallow local skin flap necrosis occurred in 2 cases, and incision healed by first intention in others patients. All patients were followed up 22 months on average (range, 12-36 months). The bone union was achieved within 3-6 months (4.4 months on average). No implant loosening or refracture was found. According to Merchan et al criteria for knee joint function evaluation, the results were excellent in 4 cases, good in 5 cases, fair in 1 case, and poor in 1 case at last follow-up; the excellent and good rate was 81.8%. Conclusion The double-plating fixation via U-shaped incision has the advantages of better exposure, great convenience to manipulation, anatomical reduction, and rigid fixation. It provides an effective treatment for type C3.3 distal femoral fracture. However, its operation indications and operating instructions should be strictly followed.
ObjectiveTo study the effectiveness of a new anterolateral approach of distal femur in the treatment of type C distal femoral fractures by comparing with traditional lateral and anterolateral approaches. MethodsThe clinical data of 51 patients with type C distal femoral fractures treated between January 2008 and August 2011 were retrospectively analyzed. Of 51 patients, 24 patients received the new anterolateral approach of distal femur combined with fixation of condylar buttress plate (modified group), and 27 patients underwent traditional lateral or anterolateral approach combined with fixation of condylar buttress plate (traditional group). There was no significant difference in gender, age, injury cause, American Society of Anesthesiologist (ASA) classification, side, fracture type, complication, and the time from injury to operation between 2 groups (P>0.05). The operation time, intraoperative blood loss, frequency of intraoperative fluoroscopy, hospitalization time, fracture healing time, and Hospital for Special Surgery (HSS) scores of the knee at 3, 6, and 12 months were recorded. ResultsThe operation was successfully completed and the incision healed by first intention in all patients. The operation time and frequency of intraoperative fluoroscopy of modified group were significantly less than those of traditional group (P<0.05). But the intraoperative blood loss and the hospitalization time showed no significant difference between 2 groups (P>0.05). All patients were followed up 12-37 months (mean, 21.3 months). X-ray films showed all fractures were union. The fracture healing time was (12.92±2.24) weeks in the modified group and (13.24±2.52) weeks in the traditional group, showing no significant difference (t=0.476, P=0.637). The knee HSS scores of modified group were significantly higher than those of traditional group at 3, 6, and 12 months after operation (P<0.05). There was no significant difference in the incidence of knee varus or valgus, leg length discrepancy, internal fixator loosening, flexing dysfunction of knee, traumatic arthritis of knee, and total complications between 2 groups (P>0.05). ConclusionComparing with traditional lateral and anterolateral approaches, using the new anterolateral approach to treat type C distal femoral fractures has the advantages of less damage to soft tissue, excellent exposure, less operation time, and frequency of intraoperative fluoroscopy, and better postoperative rehabilitation of knee joint.
Objective To explore an effective way fortreating severe complicated distal femoral fractures. Methods Twenty-six patients with complicated distal femoral fracture who all belonged to 33C3.3type according to AO/ASIF lassification, were treated with a lateral condylar buttress plate or self-desinged aliform anatomical plate, and operated on with allogeneic bone grafting. Results All cases were followed up for an average of 14 months (ranging 5-25 months). Twenty-four wounds were primary healing postoperatively, 2 wounds were infected and healed after dressing change. Twenty-four had bone healing after 411 months, 2 needed to operate again because of earlier weight-bearing resulting in fixation failure. According to shelbourne and Brueckmann score, the excellent and good rate was 88.46%. Conclusion The internal fixation forcomplicated distal femoral fracture by self-designed aliform anatomical plate and lateral condylar buttress plate with a great deal of allograft bone is an effective surgical method. As it has long oval holes and the holes are consecutive ,the aliform anatomical plate is more suitable for severe complicated fractures. At the same time, autogenous-ilium transplantation can be substituted by the allograft bone.
Objective To evaluate the effectiveness of distal femoral osteotomy aided by three-dimensional (3D) printing cutting block for correction of vaglus knee with osteoarthritis. Methods Between January 2014 and January 2016, 12 patients (15 knees) with vaglus deformity and lateral osteoarhritis underwent medial closing wedge distal femoral osteotomy. There were 5 males and 7 females, aged 30-60 years (mean, 43.8 years). The mean disease duration was 6.6 years (range, 1–12 years). The unilateral knee was involved in 9 cases and bilateral knees in 3 cases. According to Koshino’s staging system, 1 knee was classified as stage I, 9 knees as stage II, and 5 knees as stage III. The X-ray films of bilateral lower extremities showed that the femorotibial angle (FTA) and anatomical lateral distal femoral angle (aLDFA) were (160.40±2.69)° and (64.20±2.11)° respectively. Mimics software was used to design and print the cutting block by 3D printing technique. During operation, the best location of distal femoral osteotomy was determined according to the cutting block. After osteotomy, internal fixation was performed using a steel plate and screws. Results All incisions healed primarily; no complication of infection or deep vein thrombosis was observed. All patients were followed up 6-18 month (mean, 12.2 months). At 6 months after operation, the hospital for special surgery (HSS) score for knee was significantly improved to 89.07±2.49 when compared with preoperative score (65.27±1.49,t=–28.31,P=0.00); the results were excellent in 10 knees, good in 4 knees, and fair in 1 knee with an excellent and good rate of 93.3%. The bony union time was 2.9-4.8 months (mean, 3.3 months). Bone delayed union occurred in 1 case (1 knee). The postoperative FTA and aLDFA were (174.00±1.41)° and (81.87±1.06)° respectively, showing significant differences when compared with preoperative ones (t=–18.26，P=0.00;t=–25.19,P=0.00). The percentage of medial tibial plateau in whole tibial plateau was 49.78%±0.59%, showing no significant difference when compared with intraoperative measurement (49.82%±0.77%,t=0.14,P=0.89). Conclusion 3D printing cutting block can greatly improve the accuracy of distal femoral osteotomy, and ensure better effectiveness for correction of vaglus knee with osteoarthritis.
ObjectiveTo investigate the short-term effectiveness of derotational distal femoral osteotomy (DDFO) combined with medial patellofemoral ligament (MPFL) reconstruction in treatment of recurrent patellar dislocation with excessive femoral anteversion angle (FAA≥30°). MethodsBetween June 2017 and August 2019, 17 patients with recurrent patellar dislocation with FAA≥30° were treated with DDFO and MPFL reconstruction. There were 5 males and 12 females, aged 14-22 years, with an average of 17.7 years. The patella dislocated for 2 to 8 times (mean, 3.6 times). The disease duration was 2-7 years (mean, 4.6 years). The patellar apprehension tests were positive. Preoperative pain visual analogue scale (VAS) score, Lysholm score, Tegner score, and Kujala score were 4.2±1.1, 47.8±8.1, 3.6±1.1, and 56.8±5.7, respectively. FAA, mechanical lateral distal femoral angle (mLDFA), lateral patella displacement (LPD), tibial tuberosity-trochlear groove distance (TT-TG) were (34.9±3.4)°, (85.8±3.0)°, (13.7±3.8) mm, and (23.1±2.1) mm, respectively. ResultsAll incisions healed by first intention, and there was no complications such as knee stiffness, infection, and re-dislocation of the patella. All patients were followed up 13-25 months, with an average of 17.7 months. The imaging review showed that 1 case of osteotomy did not union, and achieved satisfactory results after the secondary revision and strengthening fixation; the osteotomies of other patients healed completely after 3 to 4 months of operation. The patellar apprehension tests were negative. At last follow-up, the FAA, mLDFA, LPD, and TT-TG were (15.6±2.7)°, (83.0±2.1)°, (5.0±2.6) mm, and (20.5±2.5) mm, respectively; the VAS score, Lysholm score, Tegner score, and Kujala score were 2.4±1.4, 93.4±7.8, 6.8±1.5, and 89.0±8.0, respectively. There were significant differences in the above indicators between pre- and post-operation (P<0.05). ConclusionDDFO combined with MPFL reconstruction for the recurrent patellar dislocation with excessive FAA (≥30°) can achieve good short-term effectiveness, significantly reduce knee pain, and improve function.