ObjectiveTo investigate the effectiveness of total elbow arthroplasty (TEA) with preservation of triceps brachii insertion approach.MethodsBetween January 2012 and September 2017, 17 patients with elbow disease were treated with TEA with preservation of triceps brachii insertion approach. There were 3 males and 14 females, with an average age of 65.2 years (range, 48-85 years). The injuries located on left elbow in 5 cases and on right elbow in 12 cases. There were 11 cases of distal humerus fracture (AO type C1 in 2 cases and type C3 in 9 cases); the interval between fracture and operation was 3-10 days (mean, 4.1 days). There were 3 cases of osteoarthritis and 3 cases of rheumatoid arthritis, with the disease duration of 2-26 years (mean, 8.7 years). The postoperative elbow function and pain was assessed by Mayo elbow performance score (MEPS) and visual analogue scale (VAS) score, respectively. The prosthesis position, heterotopic ossification, and periprosthetic fracture were observed by X-ray films.ResultsAll incisions healed by first intention. Sixteen patients were followed up 18-69 months (mean, 40.6 months). Intraoperative ulnar nerve injury occurred in 2 cases, and healed after symptomatic treatment. At last follow-up, the MEPS score was 55-100 (mean, 90.3). The results were excellent in 11 cases, good in 2 cases, fair in 2 cases, and poor in 1 case, with an excellent and good rate of 81.3%. The VAS score was 0-2 (mean, 0.4). X-ray reexamination showed that no polyethylene wear, prosthesis loosening and fracture, abnormal prosthesis position, periprosthetic fracture occurred during the follow-up period, and the prosthesis survival rate was 100%. Heterotopic ossification occurred in 2 and 3 months after operation in 2 cases, respectively.ConclusionThe triceps on approach for TEA are satisfactory for distal humerus fracture, osteoarthritis, and rheumatoid arthritis.
Objective To investigate the surgical technique and effectiveness of volar locking plates for senile delayed distal radius fractures. Methods Between October 2014 and September 2015, 25 cases of delayed distal radius fractures were treated by volar locking plates. There were 3 males and 22 females with an average age of 73 years (range, 65-87 years). Injury was caused by tumble in 19 cases and by traffic accident in 6 cases. All the cases had closed fracture. According to the AO classification, 10 cases were rated as type A2, 7 cases as type A3, 3 cases as type B3, and 5 cases as type C1. The manual reduction and plaster immobilization were performed in 18 cases first, but reduction failed; no treatment was given in 7 cases before surgery. The time from injury to surgery was from 33 to 126 days (mean, 61 days). Preoperatively, the volar tilting angle was (–16.0±3.1)°; the ulnar inclining angle was (10.8±7.0)°; the radial shortening was (11.2±3.6) mm; the wrist range of motion was (41.0±7.5)° in flexion and was (42.0±6.3)° in extension; and the grip strength was 33.0%±3.1% of normal side. Results All incisions healed primarily, and no postoperative complication occurred. The patients were followed up 1-1.5 years (mean, 1.3 years). The X-ray films showed that fracture union was achieved in all the patients, with the mean healing time of 9.2 weeks (range, 8-12 weeks); the displacement of the articular surface was less than 1 mm. At last follow-up, the volar tilting angle was (13.1±3.2)°; the ulnar inclining angle was (21.9±4.6)°; the radial shortening was (2.0±1.1) mm; the wrist range of motion was (52.0±11.7)° in flexion and was (65.0±4.8)° in extension; and the grip strength was 84.0%±4.2% of normal side; all showed significant difference when compared with preoperative ones (P<0.05). According to the Gartland and Werley score, the results were excellent in 15 cases, good in 6 cases, fair in 2 cases, and poor in 2 cases at last follow-up; the excellent and good rate was 84%. Conclusion By the good design of the volar locking plate and the command of surgical techniques, good effectiveness can be achieved in the treatment of senile delayed distal radius fracture.
Objective To compare the differences between volar and dorsal plate positions in the treatment of unstable fracture of distal radius. Methods From June 2000 to December 2006, 61 cases with fracture of distal radius weretreated, 27 males and 34 females aged 22-70 years (55.5 years on average), among which 18 cases were caused by traffic accidents and 43 cases falls. All cases were fresh closed fractures. All patients had AP and lateral X-ray films of the wrist preoperatively and 30 cases experienced CT scan. According to AO, there were 25 cases for B1, 18 for B2, 7 for B3, 7 for C1, and 4 for C2. All the cases were randomized into 2 groups: the wrist palmar group (group A, n=34) and dorsal group (group B, n=27), to perform volar and dorsal plate fixation, respectively. As to the measurement of fortune for the preoperative ruler and incl ination angle, group A were (—45.0 ± 53.0)º and (8.6 ± 3.1)º, respectively, and group B were (—40.0 ± 30.0)º and (7.3 ± 5.6)º, respectively. Preoperative radial shortened (12.0 ± 5.3) mm in group A, and (10.3 ± 4.2) mm in group B. Joint surface level was (4.3 ± 2.2) mm in group A, and (4.1 ± 3.3) mm in group B. Results All of the 61 cases were followed up for 6-27 months (16 months on verage). All the fractures were healed, the time to heal ing in group A was (8.2 ± 1.6) weeks, and in group B was (8.1 ± 1.2) weeks, and the difference was not significant (P gt; 0.05). As for the wrist function by Cartland-Werley scoring at the 8th week after operation, 7 cases were excellent, 10 good, and 17 poor in group A with the choiceness rate of 50.0%, while 7 cases were excellent, 11 good and 9 poor in group B with the choiceness rate of 66.7%. There was significant difference between the two groups (P lt; 0.01). And at the 24th week after operation, 21 cases were excellent, 9 good, and 4 poor in group A with the choiceness rate of 88.2%, while 18 cases were excellent, 5 good, and 4 poor in group B with the choiceness rate of 85.2%. There was no significant difference between the two groups (P gt; 0.05). As for radiological assessment by Sarmiento, device and palm incl ination angles in group A were (9.5 ± 3.1)º and (18.0 ± 8.2)º, respectively, and in group B were (11.0 ± 4.7) º and (16.0 ± 7.6)º, respectively. No radial shortening was found either in group A or in group B, and joint surface level in both groups were less than 1 mm. There was no significant difference between group A and group B in terms of all indicators postoperatively (P gt; 0.05), but there was significant difference when compared with preoperation (P lt; 0.001). With regard to comparison of postoperative compl ications between the two groups, there was no significant difference (P gt; 0.05) in early postoperative compl ications, but there was in long-term compl ications (P lt; 0.01). Conclusion The volar and dorsal plate positions may offer effective stabil ity for unstable distal radial fracture and early functional exercise. The volar plate position may influence the pronation function of the wris joint in the short run, while the dorsal plate position may cause more compl ications in the long run.
Objective To study the cl inical outcomes of Numelock II polyaxial system in treatment of type C fractures of the distal radius. Methods From March 2006 to June 2007, 12 cases of type C distal radial fractures (6 males and 6 females)were treated with open reduction and internal fixation. The mean age of the patients was 48.2 years (34-64 years)．The locations were left wrist in 5 cases and right wrist in 7 cases, including 1 case of old fracture and 11 cases of fresh fractures. All fractures were closed. The mean course of disease was 9 days and 7 hours (4 hours to 60 days). According to AO/ASIF classification, there were 4 cases of C1 type, 5 cases of C2 type and 3 cases of C3 type. Preoperatively, the palmar tilt angle was —30° to 30° (— 5° on average), and the radial inclination angle was 5° to 13° (7.7° on average), and the radial shortening was 5 mm to 15 mm (9 mm on average). One case combined with dislocation of elbow joint and 2 cases combined with multi ple injuries. Results All incision healed by first intention. Postoperative follow-up ranged from 14 months to 29 months (15.6 months on average). The X-ray films showed that the union of fractures was achieved 6-8 weeks (6.6 weeks on average). No screws breakage occurred. The articular facets weresmooth in 11 of 12 patients. After operation, the palmar tilt angle was 0° to 15° (6.7° on average), and the radial inclination angle was 5° to 15° (10.2° on average), showing significant differences when compared with those before operation (P lt; 0.05). All the radial shortening was corrected. The ROM of the wrist was 55%-100% of the normal side. The grip strength was 55%-90% of the normal side. The results were excellent in 9 cases, good in 2 cases, and poor in 1 cases by X-ray film and wrist function assessment, the excellent and good rate was 91.7%. Conclusion Numelock II polyaxial system fixation is an ideal method to treat type C fractures of the distal radius. Numelock II polyaxial mechanism may provide the free adjustabil ity of screw trajectories and a higher degree of overall stabil ity compared to monoaxial locking plates.
Objective To analyze the effectiveness of flexible internal fixation with locking plate for distal femoral fractures. Methods Between January 2015 and June 2016, 21 cases of distal femoral fractures were treated. There were 5 males and 16 females with an average age of 62 years (range, 32-88 years). Injury was caused by falling in 14 cases, by traffic accident in 5 cases, and by falling from height in 2 cases. The fractures located at the left side in 13 cases and the right side in 8 cases. Twenty cases were fresh closed fractures and 1 case was open fracture. According to AO/Association for the Study of Internal Fixation (AO/OTA) typing, there were 5 cases of type 33-A1, 3 of type 33-A2, 8 of type 33-A3, 2 of type 33-C2, and 3 of type 33-C3. The time from injury to operation was 3-13 days (mean, 6.5 days). Results All operation incisions healed primarily. Eighteen patients were followed up 12-24 months (mean, 16 months). All fractures healed, and the healing time was 8-24 weeks (mean, 16.6 weeks). The articular surface was smooth and the thigh length was recovered. No screw loosening, plate breakage, valgus or varus of the knee, stiff of the knee or non-unions occurred during follow-up. There was no significant difference in visual analogue scale (VAS) score between at 6 and 12 months after operation (P>0.05), and the difference was significant bewteen the other time points (P<0.05). There were significant differences in the range of motion of knee between 1 month and 3, 6, 12 months (P<0.05); there was no significant difference between 3, 6, and 12 months (P>0.05). There were significant differences in the Neer scores between 1, 3, 6, and 12 months after operation (P<0.05). According to Neer score criteria, the results were excellent in 12 cases and good in 6 cases at 12 months after operation. Conclusion Flexible internal fixation with locking plate for distal femoral fractures can get good functional recovery.
ObjectiveTo review the current status and progress of locking plate for the treatment of distal femoral comminuted fractures.MethodsThe related literature was extensively reviewed to summarize the current status and progress in the treatment of distal femoral comminuted fracture with locking plate from four aspects: the current treatment situation, the shortcomings of locking plate and countermeasures, the progress of locking technology, locking plate and digital orthopedic technology.ResultsTreatment of distal femoral comminuted fractures is challenging. Locking plates, the most commonly used fixation for distal femoral comminuted fractures, still face a high rate of treatment failure. Double plates can improve the mechanical stability of comminuted fractures, but specific quantitative criteria are still lacking for when to choose double plates for fixation. The far cortial locking screw has shown good application value in improving the micro-movement and promoting the growth of callus. The biphasic plating is a development of the traditional locking plate, but needs further clinical examination. As an auxiliary means, digital orthopedic technology shows a good application prospect.ConclusionThe inherent defect of locking plate is a factor that affects the prognosis of distal femoral comminuted fracture. The optimization of locking technology combined with digital orthopedic technology is expected to reduce the failure rate of treatment of distal femoral comminuted fracture.
Objective To assess the factors that affect the outcome of distal femoral fractures treated by retrograde intramedullary nail ing. Methods Between November 1999 and June 2006, 30 patients with 31 distal femoral fractures (15 males and 15 females, 1 bilateral) were treated by retrograde nail ing. Their ages ranged from 44 to 82 years old (average, 67.2 years old). The causes of injury were sl ipping downs in 17 patients, traffic accidents in 11, and fall ing from height in 2. Theaverage interval from injury to operation was 1.8 days. There were 14 cases of A1 fracture, 7 cases of A2, 8 cases of A3, and 2 cases of C1 according to AO/OTA classifications. The mean distance between the most distal l ine of the fracture and the intercondylar notch was 7.2 cm (range, 0-12 cm). Closed retrograde nail ing was done without reaming, and bone grafts were not done. Re sults The operation time averaged 76 minutes (range, 45-110 minutes). All patients were followed up for 19-69 months, and the mean follow-up duration was 27 months. Twenty-eight of 31 fractures united on the average of 14.7 weeks (range, 12-22 weeks). Compl ications occurred in 7 cases. There were 3 nonunions in AO-A3 fractures which were treated by changing implants or bone graft. Two patients suffered screw loosening of distal locking, that were re-fixed. Two patients showed l imited knee motion of less than 90 degrees flexion. There were no cases of deep infection, malunion over 10 degrees of angulation or 1 cm of shortening. A satisfactory outcome (excellent and good results) was achieved in 26 of 31 cases (84%), according to Schatzker and Lambert’s criteria. Poor results and compl ications were related to fractures of comminution and located within 5 cm from the intercondylar notch (Pearson Chi-square test, P=0.03). Other possible factors including age, kinds of nails used, associated injury, and numbers of distal locking screws were not related to the outcome and compl ication (Pearson Chi-square test, P gt; 0.05). Conclusion Retrograde nail ing may be a useful option for distal femoral fractures, but attention should be paid to comminuted fractures or fractures close to the knee joint.