The three-dimensional (3-D) Titanium miniplate system is one of the newest internal rigid fixation for the maxillo-mandibular surgery in recent years. The geometry of the plate assures a good stability in the three-dimensions of the fracture sits. Thirty patients suffering from maxillo-mandibular fractures had been operated on using the 3-D Titanium miniplates since 1991. The group of the patient included 16 cases of mandibular fractures, 8 cases of maxillary fractures and 6 cases of maxillo-mandibular fracture. All of the patient had very good result without any complication. The follow-up was 6 months to 3 years. The 3-D Titanium miniplate as an ideal easy to use, good resistance against torque forces and, compact forms of the miniplate were the some of the advantages. Clinical examples had been provided to illustrate the actual usage of the 3-D miniplate in the field of the surgical treatment for the maxillo-mandibular fracture. It is the author’s opinion that the internal rigid fixation by 3-D Titanium miniplates is a promising method of treating fractures of the maxilla and is to be better tolerated by the patients and surgeons.
Objective To examine the mRNA expression of activin A(ACT A) and follistatin(FS) during mandibular lengthening and to elucidate the regulating pattern of during mandibular distractionosteogenesis.Methods Skeletally mature-white New Zealand rabbits were established right mandibular distraction osteogenesis models and the mandibles were lengthened 7 days after osteomy. Atthe end of latency period and the end of distraction period, 10,20, 30, 40 and60 days after fixation, the regenerating tissue of animals’ lengthened mandibles and that of the other side normal mandibles were harvested to extract RNA andto analyse ACT A, FS mRNA by RT-PCR.Results The expression of ACT A mRNA was not detectable in normal bone tissue and ACT A mRNA began to express at the end of latency period. The expression of ACT AmRNA increased gradually along with the beginning of distraction and reached the peak on the 10th and 20th days of distraction which was 5.04 and 4.98 times as much as that of the end of latency period, respectively. The trend of expression of FS mRNA during mandibular distraction osteogenesis was the same as expression of ACT A mRNA. Conclusion ACT A/FS play an important role during rabbit mandibular distraction osteogenesis.
Objective To investigate the mode and influential factor of newbone formation following distraction osteogenesis in mandibular lengthening. Methods Corticotomy was performed on bilateral mandibles in twelve adult male goats. A custommade distractor was used to lengthen the mandible at a rate of 1mm/day for 10 days (total 10 mm elongation). Four goats were sampled respectivelyat 2, 4 and 8 weeks after completion of distraction. The lengthening mandibles were examined by roentgenography and histology. Results Newly formed callus was observed in the distraction gap after mandibular lengthening. The new bone exhibited intramembranous ossification generally, but cartilage islands could be found in the specimen that diastractor loosed. Conclusion The above findings indicate that the mode of new bone formation in mandibular lengthening following distraction osteogenesis appears to be intramembranous ossification and that endochondral ossification takes place in case distractor has loosened.
目的 探讨多层螺旋CT对下颌骨骨折的诊断价值。 方法 对2007年4月-2009年10月下颌骨不同部位骨折的45例患者进行多层螺旋CT轴位扫描，并行多平面、表面遮盖法等三维重建，对下颌骨骨折CT表现特征作回顾性分析。 结果 45例下颌骨骨折中，位于下颌体骨折24例，下颌角骨折5例，下颌升支骨折6例，髁部骨折13例，冠突骨折2例；颞下颌关节脱位中，单侧脱位3例，双侧脱位5例。 结论 多层螺旋CT能准确诊断下颌骨各部位骨折，对诊治方案具有重要价值。
Thirty cases of mandibular deformities undergoing sagittal splitting ramus osteotomy for their corrections were presented. The surgical precedure was carefully designed according to each individual deformity before operation, After treatment, the facial configuration and the function of occlusion were markedly improved. There was no non-union of the osteotomy and no recurrence of the deformity after correction. Complications happened in 4 cases and were all improved following treatment. The planning and techniques of the operation were discussed in detailed.
OBJECTIVE: To study the effect of collagen/hydroxyapatite(CHA) instead of autogenous bone transplantation on repairing the mandibular defects. METHODS: Ten Chinese experimental minipigs were made 2 cm bone defects in diameter in the mandible. The experimental group was implanted CHA, while the control group was implanted autogenous bone. The basic parameters of bone dynamics were determined by bone metrology. RESULTS: There was remarkable difference between the two groups in the mean distance and mineralization apposition rate of double label bands marked by tetracycline(P lt; 0.05), while the mean osteoid seam width and mineralization lag time had no remarkable difference(P gt; 0.05). It suggested that CHA had good osteogenesis. The collagen in CHA offered the condition of bone mineralization, and the mineralization peak of experimental group was present at 4 weeks earlier than that of control group (8 weeks). CONCLUSION: CHA may be a substitute of autogenous bone transplantation in repairing the mandibular defects, and the second operation for offering the implanting bone is avoidable, therefore, CHA may be an ideal material to repair bone defects.
Six cases of maxillary tumors after being resccted radically, a primary repair of the maxillary defects were carried out by grafting of the pedicled buccal fat pad as the oral linning combined with bone graft. The cases were followed from 8 to 14 months. The function of the maxillary sinuses was normal and the facial contour was restored symmetrical. The applied anatomy and the method of operation were introduced in details. The advantages of the method were discussed.
Objective To explore the feasibility and effectiveness of mixed reality technology for localizing perforator vessels in the repair of mandibular defects using free fibular flap. Methods Between June 2020 and June 2023, 12 patients with mandibular defects were repaired with free fibular flap. There were 8 males and 4 females, with an average age of 61 years (range, 35-78 years). There were 9 cases of ameloblastomas and 3 cases of squamous cell carcinomas involving the mandible. The disease duration ranged from 15 days to 2 years (median, 14.2 months). The length of mandibular defects ranged from 5 to 14 cm (mean, 8.5 cm). The area of soft tissue defects ranged from 5 cm×4 cm to 8 cm×6 cm. Preoperative enhanced CT scans of the maxillofacial region and CT angiography of the lower limbs were performed, and the data was used to create three-dimensional models of the mandible and lower limb perforator vessels. During operation, the mixed reality technology was used to overlay the three-dimensional model of perforator vessels onto the body surface for harvesting the free fibular flap. The length of the fibula harvested ranged from 6 to 15 cm, with a mean of 9.5 cm; the size of the flap ranged from 6 cm×5 cm to 10 cm×8 cm. The donor sites were sutured directly in 7 cases and repaired with free skin grafting in 5 cases. Results Thirty perforator vessels were located by mixed reality technology before operation, with an average of 2.5 vessels per case; the distance between the exit point of the perforator vessels located before operation and the actual exit point ranged from 1 to 4 mm, with a mean of 2.8 mm. All fibular flaps survived; 1 case had necrosis at the distal end of flap, which healed after dressing changes. One donor site had infection, which healed after anti-inflammatory dressing changes; the remaining incisions healed by first intention, and the grafts survived smoothly. All patients were followed up 8-36 months (median, 21 months). The repaired facial appearance was satisfactory, with no flap swelling. Among the patients underwent postoperative radiotherapy, 2 patients had normal bone healing and 1 had delayed healing at 6 months. Conclusion In free fibular flap reconstruction of mandibular defects, the use of mixed reality technology for perforator vessel localization can achieve three-dimensional visualization, simplify surgical procedures, and reduce errors.
Objective To reconstruct the maxillary defect by usingfree vascularized iliac osteomusculocutaneous flap combined with immediate zygomatic implantation for early rehabilitation of maxillary contour and masticatory function. Methods In August 2003, the patient presented with deformity ofleft middle face(Brown Ⅱ type defect) after subtotal maxillectomy. After hospitalization, a set of preoperative preparations were made, including spiral CT scanning, manufacture of nature size anatomical model and implantation protocol design. The maxillary defect was reconstructed with free vascularized iliac osteomusculocutaneous flap combined with simultaneous insertion of one Br¨nemark zygomatic implant and two general implants. Six months later the prosthesis were placed. Results The vascularized osteomusculocutaneous flap survived, the osseointegration was observed between bone and implant 6 months later. The contour of face and palate was satisfactory, the normal occluding relation was gained. The average masticatory force of operative side was 76.3% of the normal side. No tumor recurrence was noticed during the follow-up of 14 months. Conclusion It is a reliable method for functional reconstruction of maxillary defect via vascularized iliac osteomusculocutaneous flap combined with immediate zygomatic implantation.