The impeller, as a key component of artificial heart pumps, experiences high shear stress due to its rapid rotation, which may lead to hemolysis. To enhance the hemolytic performance of artificial heart pumps and identify the optimal combination of blade parameters, an optimization design for existing pump blades is conducted. The number of blades, outlet angle, and blade thickness were selected as design variables, with the maximum shear stress within the pump serving as the optimization objective. A back propagation (BP) neural network prediction model was established using existing simulation data, and a grey wolf optimization algorithm was employed to optimize the blade parameters. The results indicated that the optimized blade parameters consisted of 7 impeller blades, an outlet angle of 25 °, and a blade thickness of 1.2 mm; this configuration achieved a maximum shear stress value of 377 Pa—representing a reduction of 16% compared to the original model. Simulation analysis revealed that in comparison to the original model, regions with high shear stress at locations such as the outer edge, root, and base significantly decreased following optimization efforts, thus leading to marked improvements in hemolytic performance. The coupling algorithm employed in this study has significantly reduced the workload associated with modeling and simulation, while also enhancing the performance of optimization objectives. Compared to traditional optimization algorithms, it demonstrates distinct advantages, thereby providing a novel approach for investigating parameter optimization issues related to centrifugal artificial heart pumps.
ObjectiveTo systematically review the value of radiomics in the diagnosis of glioblastoma. MethodsPubMed, EMbase, Web of Science and The Cochrane Library databases were electronically searched to collect studies on radiomics in the grading of gliomas or the differentiation diagnosis from inception to May 30th, 2021. Two reviewers independently screened literature, extracted data, and assessed the risk of bias and the quality of the included studies. Meta-analysis was then performed using Meta-Disc 1.4 software and RevMan 5.3 software. ResultsA total of 37 studies involving 2 746 subjects were included. The results of meta-analysis showed that the pooled sensitivity, specificity, and diagnostic odds ratio for the diagnosis of glioblastoma by radiomics were 0.91 (95%CI 0.89 to 0.92), 0.88 (95%CI 0.87 to 0.90), and 78.00 (95%CI 50.81 to 119.72), respectively. The area under the summary receiver operating characteristic (SROC) curve was 0.95. The key radiomic features for correct diagnosis of glioblastoma included intensity features and texture features of the lesions. ConclusionThe current evidence shows that radiomics provides good diagnostic accuracy for glioblastoma. Due to the limited quality and quantity of the included studies, more high-quality studies are required to verify the above conclusions.
Red blood cells are destroyed when the shear stress in the blood pump exceeds a threshold, which in turn triggers hemolysis in the patient. The impeller design of centrifugal blood pumps significantly influences the hydraulic characteristics and hemolytic properties of these devices. Based on this premise, the present study employs a multiphase flow approach to numerically simulate centrifugal blood pumps, investigating the performance of pumps with varying numbers of blades and blade deflection angles. This analysis encompassed the examination of flow field characteristics, hydraulic performance, and hemolytic potential. Numerical results indicated that the concentration of red blood cells and elevated shear stresses primarily occurred at the impeller and volute tongue, which drastically increased the risk of hemolysis in these areas. It was found that increasing the number of blades within a certain range enhanced the hydraulic performance of the pump but also raised the potential for hemolysis. Moreover, augmenting the blade deflection angle could improve the hemolytic performance, particularly in pumps with a higher number of blades. The findings from this study can provide valuable insights for the structural improvement and performance enhancement of centrifugal blood pumps.
Tesla blood pumps demonstrate a reduced propensity for hemolysis and thrombosis compared with vane blood pumps. Considering the restricted driving force within the secondary flow channel of vane blood pumps, along with the low hydraulic efficiency of conventional Tesla blood pumps and their internal flow characteristics that significantly contribute to hemolysis and thrombosis, this study introduces a set of vanes atop the rotor of the Tesla blood pump. This forms a dual-fluid domain rotor, and an axial dual-outlet volute shell structure is adopted to realize the separation of the fluid domains. Through numerical simulations of the new structure, a comparative analysis was conducted in this study on the internal flow characteristics of double-outlet and single-outlet volute shells, and symmetric and asymmetric cross-sections of the same rotor. The results indicate that the flow field distribution is more uniform under the double-outlet volute shell structure, and overall energy dissipation is decreased. After implementing the double-outlet design, in the asymmetric cross-section, compared with the symmetric cross-section, the fluid velocity gradient and turbulent kinetic energy at the tongue of the septum are reduced, and the fluid velocity gradient at the convergence of the diffuser tube outlets are also decreased. The maximum scalar stress is lower, and the decline in head and efficiency is mitigated. Moreover, compared with the single-outlet volute shell, the hemolysis index in the asymmetric cross-section is reduced. In summary, this paper proposes a novel dual-outlet centrifugal disk blood pumps, which can provide a reference for the structural design and performance optimization of magnetically levitated centrifugal blood pumps.
The study aims to investigate whether there is difference in pre-treatment white matter parameters in treatment-resistant and treatment-responsive schizophrenia. Diffusion tensor imaging (DTI) was acquired from 60 first-episode drug-naïve schizophrenia (39 treatment-responsive and 21 treatment-resistant schizophrenia patients) and 69 age- and gender-matched healthy controls. Imaging data was preprocessed via FSL software, then diffusion parameters including fractional anisotropy (FA), mean diffusivity (MD), axial diffusivity (AD) and radial diffusivity (RD) were extracted. Besides, structural network matrix was constructed based on deterministic fiber tracking. The differences of diffusion parameters and topology attributes between three groups were analyzed using analysis of variance (ANOVA). Compared with healthy controls, treatment-responsive schizophrenia showed altered white matter mainly in anterior thalamus radiation, splenium of corpus callosum, cingulum bundle as well as superior longitudinal fasciculus. While treatment-resistant schizophrenia patients showed white matter abnormalities in anterior thalamus radiation, cingulum bundle, fornix and pontine crossing tract relative to healthy controls. Treatment-resistant schizophrenia showed more severe white matter abnormalities in anterior thalamus radiation compared with treatment-responsive patients. There was no significant difference in white matter network topological attributes among the three groups. The performance of support vector machine (SVM) showed accuracy of 63.37% in separating the two patient subgroups (P = 0.04). In this study, we showed different patterns of white matter alterations in treatment-responsive and treatment-resistant schizophrenia compared with healthy controls before treatment, which may help guiding patient identification, targeted treatment and prognosis improvement at baseline drug-naïve state.