The repair of the long bone defects by combined grafting of homogenous deealcified bene matrix(DBM ) with centrally enveloped vascularized periosteum Was reported as a new techniqe. Theroentgenograms,bone mineral count and histologic examination were done. The results showed thatthis method was beneficial and had better effect on prornoting healing of the long bene defeets fromone stage operation The oporative proeedure was described on deatil It was considered that the homogenous DBM ...
Objective To introduce an injectable andin situ gelling gelatin hydrogel, and to explore the possibility as a carrier for demineralized bone matrix (DBM) powder delivery. Methods First, thiolated gelatin was prepared and the thiol content was determined by Ellman method, and then the injectable andin situ gelling gelatin hydrogel (Gel) was formed by crosslinking of the thiolated gelatin and poly (ethylene oxide) diacrylate and the gelation time was determined by inverted method. Finally, the DBM-Gel composite was prepared by mixing Gel and DBM powder. The cytotoxicity was tested by live/dead staining and Alamar blue assay of the encapsulated cells in the DBM-Gel. Forin vitro cell induction, C2C12 cells were firstly incubated onto the surface of the DBM and then the composite was prepared. The experiment included two groups: DBM-Gel and DBM. The alkaline phosphatase (ALP) activity was determined at 1, 3, 5,and 7 days after culture.In vivo osteoinductivity was evaluated using ectopic bone formation model of nude rats. Histological observation and the ALP activity was measured in DBM-Gel and DBM groups at 4 weeks after implantation. Results The thiol content in the thiolated gelatin was (0.51±0.03) mmol/g determined by Ellman method. The gelation time of the hydrogel was (6±1) minutes. DBM powder can be mixed with the hydrogel and injected into the implantation site within the gelation time. The cells in the DBM-Gel exhibited spreading morphology and connected each other in part with increasing culture time. The viability of the cells was 95.4%±1.9%, 97.3%±1.3%, and 96.1%±1.6% at 1, 3, and 7 days after culture, respectively. The relative proliferation was 1.0±0.0, 1.1±0.1, 1.5±0.1, and 1.6±0.1 at 1, 3, 5, and 7 days after culture respectively.In vitro induction showed that the ALP activity of the DBM-Gel group was similar to that of the DBM group, showing no significant difference (P>0.05). With increasing culture time, the ALP activities in both groups increased gradually and the activity at 5 and 7 days was significantly higher than that at 1 and 3 days (P<0.05), while there was no significant difference between at 1 and 3 days, and between 5 and 7 days (P>0.05). At 4 weeks after implantationin vivo, new bone and cartilage were observed, but no bone marrow formation in DBM-Gel group; in DBM group, new bone, new cartilage, and bone marrow formation were observed. The histological osteoinduction scores of DBM-Gel and DBM groups were 4.0 and 4.5, respectively. The ALP activities of DBM-Gel and DBM groups were respectively (119.4±22.7) and (146.7±13.0) μmol/mg protein/min, showing no significant difference (t=–2.085,P=0.082). Conclusion The injectable andin situ gelling gelatin hydrogel for delivery of DBM is feasible.
ObjectiveTo investigate the correlation between the content of bone morphogenetic protein 2 (BMP-2) in demineralized bone matrix (DBM) and its osteogenic activity in vitro and in vivo, in order to choose a simple and convenient method to evaluate the osteogenic activity of DBM.MethodsThe left mid-femoral tissues of 9 donors were taken, and DBMs (S1-S9) were prepared by dynamic decalcification process, and inactivated DBM (control group) was prepared at the same time. Protease inhibitor method, collagenase method, guanidine hydrochloride/ethylene diamine tetraacetic acid (EDTA) method, and RIPA lysate method were used to extract BMP-2 in S1-S9 and inactivated DBMs. The BMP-2 content was measured and the differences between DBMs were compared. Then the S1-S9 and inactivated DBMs were co-cultured with mouse embryonic osteoblasts MC3T3-E1, respectively. The cell proliferation was detected by MTT method and fluorescence staining, and alkaline phosphatase (ALP) activity was detected at the same time. Thirty BALB/c male nude mice were divided into 10 groups, namely S1-S9 DBM groups (S1-S9 groups) and inactivated DBM group (control group), with 3 mice in each group. Muscle pockets of the middle thighs were prepared on both hindlimbs of mice in each group, and implanted corresponding DBM materials. At 4 weeks after operation, the samples were taken for HE staining observation and semi-quantitative evaluation, and the new bone formation score was calculated.ResultsThe BMP-2 content of DBM derived from different donor bones was distinct. The BMP-2 content obtained by different extraction methods for DBM prepared from the same donor bone was also different, and the extraction efficiency of the guanidine hydrochloride/EDTA method was the highest. In vitro cell experiments, MTT test displayed that cell proliferations and ALP activity were significantly higher in S4 and S6 groups than in other groups at each time point after co-cultivation (P<0.05). Moreover, the cell proliferation of S4 group was the most significant at 7 days (P<0.05); fluorescence staining demonstrated that the osteoblasts of each group was in good condition, but the osteoblasts of S1, S2, S3, S4, and S6 groups were significantly more than other groups. In vivo ectopic osteogenesis experiments, the cartilage and new bone formation could be seen in the bone graft area of S1-S6 groups at 4 weeks after operation, and with the increase of BMP-2 content, the more new bone formation induced by the material, the higher the score of new bone formation of the material (P<0.05). Among them, S4 and S6 groups contained a large number of chondrocytes and osteoblasts in the osteogenesis area.ConclusionThe osteogenic activity of DBM can be evaluated through BMP-2 quantitative detection combined with in vitro osteoblast proliferation and differentiation experiments.
Objective To evaluate the biomechanicalproperties and structuralcharacteristics of various composites of partially decalcified allogenic bone matrix gelatin and bone cement at different ratios. Methods According to Urist method, partially decalcified allogenic bone matrix gelatin was prepared and mixedwith bone cement at different ratios of 0, 400, 500, and 600mg/g. Then the comparisons of these composites were performed in microstructure, ultimate compression strength and ultimate bending strength properties. Results The electronic microscope showed that the bone particles and bone cement were distributed evenly in the composite, irregularly connecting by multiple points; with the increase ofbone particles and decrease of bone cement in the composite, there were more and more natural crevices, varying from 100 μm to 400 μm in width, in the biomaterials. Of all the composites with the ratios of 0, 400,500, and 600 mg/g, the measurements of ultimate compression strength were (71.7±2.0) MPa, (46.9±3.3) MPa, (39.8±4.1) MPa, and (32.2±3.4) MPa, respectively; and the measurements ofultimate bending strength were (65.0±3.4) MPa, (38.2±4.0) MPa, (33.1±4.3) MPa and (25.3±4.6) MPa, respectively. Conclusion The compositeof partially decalcified allogenic bone matrix gelatin and bone cement has a good biomechanical property and could be easily fabricated and re-shaped, which make it available to be used clinically as an idea bone graft biomaterial.
Objective To observe the histological structure and cytocompatibility of novel acellular bone matrix (ACBM) and to investigate the feasibility as a scaffold for bone tissue engineering. Methods Cancellous bone columns were harvested from the density region of 18-24 months old male canine femoral head, then were dealt with high-pressure water washing, degreasing, and decellularization with Trixon X-100 and sodium deoxycholate to prepare the ACBM scaffold. The scaffolds were observed by scanning electron microscope (SEM); HE staining, Hoechst 33258 staining, and sirius red staining were used for histological analysis. Bone marrow mesenchymal stem cells (BMSCs) from canine were isolated and cultured with density gradient centrifugation; the 3rd passage BMSCs were seeded onto the scaffold. MTT test was done to assess the cytotoxicity of the scaffolds. The proliferation and differentiation of the cells on the scaffold were observed by inverted microscope, SEM, and live/dead cell staining method. Results HE staining and Hoechst 33258 staining showed that there was no cell fragments in the scaffolds; sirius red staining showed that the ACBM scaffold was stained crimson or red and yellow alternating. SEM observation revealed a three dimensional interconnected porous structure, which was the microstructure of normal cancellous bone. Cytotoxicity testing with MTT revealed no significant difference in absorbance (A) values between different extracts (25%, 50%, and 100%) and H-DMEM culture media (P gt; 0.05), indicating no cytotoxic effect of the scaffold on BMSCs. Inverted microscope, SEM, and histological analysis showed that three dimensional interconnected porous structure of the scaffold supported the proliferation and attachment of BMSCs, which secreted abundant extracellular matrices. Live/dead cell staining results of cell-scaffold composites revealed that the cells displaying green fluorescence were observed. Conclusion Novel ACBM scaffold can be used as an alternative cell-carrier for bone tissue engineering because of thoroughly decellularization, good mircostructure, non-toxicity, and good cytocompatibility.
Because of its high biological compatibility, titanium has been a good biomaterial. The implanted artificial bone made from titanium can contact with the vital and mature osseous tissue directly within 3-6 months, the so-called osteointergration. In order to promote the process of osteointergration, FDBM of rabbit was prepared and was combined with pure titanium so as to speed up osteointergration. The study focused on bone density, bone intergration rate, new bone growth rate around the pure titanium, and the Ca2+ and PO(4)3- density of titanium-bone interface. A control group of pure titanium inplant without FDBM was set up. The results showed FDBM had no antigenicity. It could induce and speed up the new bone formation at titanium-bone interface. The titanium-bone intergration time was within 2 months. It was suggested that there were more bone morphogenesis protein (BMP) or other bone induction and bone formation factors in brephobone than that in child and adult bone. As a kind of bone induction material, FDBM was easy prepared, cheap in price, easy to storage, no antigenicity and obvious bone-inductive function.
Objective To fabricate a novel composite scaffold with acellular demineralized bone matrix/acellular nucleus pulposus matrix and to verify the feasibility of using it as a scaffold for intervertebral disc tissue engineering through detecting physical and chemical properties. Methods Pig proximal femoral cancellous bone rings (10 mm in external diameter, 5 mm in internal diameter, and 3 mm in thickness) were fabricated, and were dealed with degreasing, decalcification, and decellularization to prepare the annulus fibrosus phase of scaffold. Nucleus pulposus was taken from pig tails, decellularized with Triton X-100 and deoxycholic acid, crushed and centrifugalized to prepare nucleus pulposus extracellular mtrtix which was injected into the center of annulus fibrosus phase. Then the composite scaffold was freeze-dryed, cross-linked with ultraviolet radiation/carbodiimide and disinfected for use. The scaffold was investigated by general observation, HE staining, and scanning electron microscopy, as well as porosity measurement, water absorption rate, and compressive elastic modulus. Adipose-derived stem cells (ADSCs) were cultured with different concentrations of scaffold extract (25%, 50%, and 100%) to assess cytotoxicity of the scaffold. The cell viability of ADSCs seeded on the scaffold was detected by Live/Dead staining. Results The scaffold was white by general observation. The HE staining revealed that there was no cell fragments on the scaffold, and the dye homogeneously distributed. The scanning electron microscopy showed that the pore of the annulus fibrosus phase interconnected and the pore size was uniform; acellular nucleus pulposus matrix microfilament interconnected forming a uniform network structure, and the junction of the scaffold was closely connected. The novel porous scaffold had a good pore interconnectivity with (343.00 ± 88.25) µm pore diameter of the annulus fibrosus phase, 82.98% ± 7.02% porosity and 621.53% ± 53.31% water absorption rate. The biomechanical test showed that the compressive modulus of elasticity was (89.07 ± 8.73) kPa. The MTT test indicated that scaffold extract had no influence on cell proliferation. Live/Dead staining showed that ADSCs had a good proliferation on the scaffold and there was no dead cell. Conclusion Novel composite scaffold made of acellular demineralized bone matrix/acellular nucleus pulposus matrix has good pore diameter and porosity, biomechanical properties close to natural intervertebral disc, non-toxicity, and good biocompatibility, so it is a suitable scaffold for intervertebral disc tissue engineering.
Objective To investigate whether combining use of platelet-rich plasma (PRP) and decalcified bone matrix (DBM) has synergistic action on promoting bone consol idation and heal ing. Methods Forty male New Zealand rabbits (weighing 2.2-2.8 kg) were randomly divided into 4 groups (n=10). The whole blood was extracted from the central aural artery and PRP was prepared with the Landesberg’s method. An 1 cm-defect was made below the tibiofibular joint of the lefttibia through osteotomy. In group A, defect was repaired by distraction osteogenesis (1 cm); in group B, defect was repaired with 0.5 cm DBM and then by distraction osteogenesis (0.5 cm); in group C, defect was repaired by distraction osteogenesis (1 cm) and local injection of 1 mL PRP; in group D, defect was repaired by 0.5 cm DBM combined with 1 mL PRP and then by distraction osteogenesis (0.5 cm). Then lengthening started at 7 days after operation, at a rate of 1 mm/day and 0.5 mm every time for 10 days (groups A and C) or for 5 days (groups B and D). After the lengthening, the consolidation was performed. The X-ray films were taken at 0, 12, 17, 27, and 37 days after operation. At 37 days after operation, the tibial specimens were harvested for Micro-CT scanning, three-dimensional reconstruction and biomechanical test. Results The X-ray films showed that new bone formation in groups B and C was obviously better than that in groups A and D at 37 days. The bone mineral density (BMD), bone mineral content (BMC), and bone volume fraction (BVF) of groups B and C were significantly higher than those of groups A and D (P lt; 0.05); the BMD and BMC of group C were significantly higher than those of group B (P lt; 0.05); the BVF had no significant difference between groups B and C (P gt; 0.05). There was no significant difference in BMD, BMC, and BVF between groups A and D (P gt; 0.05). The trabecula number (Tb.N) of group C was significantly more than that of other groups (P lt; 0.05), and the trabecula spacing (Tb.Sp) of group C was significantly smaller than that of other groups (P lt; 0.05), but no significant differencewas found among other groups (P gt; 0.05). There was no significant difference in the trabecula thickness among 4 groups (P gt; 0.05). The ultimate angular displacement had no significant difference among 4 groups (P gt; 0.05). The maximum torque of groups B and C was significantly higher than that of groups A and D (P lt; 0.05); the maximum torque of group C was significantly higher than that of group B (P lt; 0.05); no significant difference was found between groups A and D (P gt; 0.05). Conclusion In the rabbit bone defect/lengthening model, local injection of PRP can enhance bone consol idation effectively during consol idation phase. In normal distraction rate, DBM can promote bone consol idation during distraction osteogenesis. In the early stage of distraction osteogenesis, combining use of DBM and PRP can not further promote bone consolidation and healing.
Objective Tissue engineered bone (TEB) lacks of an effective and feasible method of storage and transportation. To evaluate the activity of osteogenesis and capabil ity of ectopic osteogenesis for TEB after freeze-dried treatment in vitro and in vivo and to explore a new method of preserving and transporting TEB. Methods Human bone marrow mesenchymal stem cells (hBMSCs) and decalcified bone matrix (DBM) were harvested from bone marrow and bone tissue of the healthy donators. TEB was fabricated with the 3rd passage hBMSCs and DBM, and they were frozen and dried at extremely low temperatures after 3, 5, 7, 9, 12, and 15 days of culture in vitro to obtain freeze-dried tissue engineered bone (FTEB). TEB and FTEB were observed by gross view and scanning electron microscope (SEM). Western blot was used to detect the changes of relative osteogenic cytokines, including bone morphogenetic protein 2 (BMP-2), transforming growth factor β1 (TGF-β1), and insul in-l ike growth factor 1 (IGF-1) between TEB and FTEB. The ectopic osteogenesis was evaluated by the methods of X-ray, CT score, and HE staining after TEB and FTEB were transplanted into hypodermatic space in athymic mouse. Results SEM showed that the cells had normal shape in TEB, and secretion of extracellular matrix increased with culture time; in FTEB, seeding cells were killed by the freeze-dried process, and considerable extracellular matrix were formed in the pore of DBM scaffold. The osteogenic cytokines (BMP-2, TGF-β1, and IGF-1) in TEB were not decreased after freeze-dried procedure, showing no significant difference between TEB and FTEB (P gt; 0.05) except TGF-β1 15 days after culture (P lt; 0.05). The ectopic osteogenesis was observed in TEB and FTEB groups 8 and 12 weeks after transplantation, there was no significant difference in the calcified level of grafts between TEB and FTEB groups by the analysis of X-ray and CT score. On the contrary, there was no ectopic osteogenesis in group DBM 12 weeks after operation. HE staining showed that DBM scaffold degraded and disappeared 12 weeks after operation. Conclusion The osteogenic activity of TEB and FTEB is similar, which provides a new strategy to preserve and transport TEB.
OBJECTIVE: To explore the possibility of repair long segmental bone defects and preventing infection with cefazolin loaded bone matrix gelatin (C-BMG). METHODS: C-BMG was made from putting cefazolin into BMG by vacuum adsorption and freeze-drying techniques. The sustaining period of effective drug concentration in vitro and in vivo was detected by inhabition bacteria, and the drug concentration in local tissues (bone and muscle) and plasma after implantation of C-BMG was examined by high performance liquid chromatography(HPLC). RESULTS: The effective inhibition time to staphylococcus aureus of C-BMG was 22 days in vitro, while 14 days in vivo. The drug concentration in local tissues(bone and muscle) were higher than that of plasma, and the drug concentration in local tissues was higher in early stage, later it kept stable low drug release. It suggested that C-BMG had excellent ability to repair segmental long bone defects. CONCLUSION: C-BMG can gradually release cefazolin with effective drug concentration and has excellent ability to repair segmental long bone defects. It may be a novel method to repair segmental long bone defects and prevent infection after the operation.