Objective To prepare chitosan microcarriers and to use it to cultivate rat primary hepatocytes. Methods The crosslinked chitosan microcarrier was prepared by the reaction of glutaraldehyde with chitosan. Various factors that influence the preparation were studied and the reaction conditions were optimized. Rat primary hepatocytes cultured on chitosan microcarrier were observed by using phase contrast microscope and scanning electron microscope. Results Chitosan microcarriers with good properties could be prepared by adjusting the concentration of chitosan solution and the quantity of glutaraldehyde. Rat hepatocytes cultured on chitosan microcarriers retained the spherical shape as they have in vivo. And albumin secretion can last over one week. The highest albumin secretion rate reached 26.7μg/24h/ml. Conclusion Chitosan microcarriers is a promising scaffold for hepatocyte attachment, which can be used in bioartificial liver support system.
Objective To introduce an injectable andin situ gelling gelatin hydrogel, and to explore the possibility as a carrier for demineralized bone matrix (DBM) powder delivery. Methods First, thiolated gelatin was prepared and the thiol content was determined by Ellman method, and then the injectable andin situ gelling gelatin hydrogel (Gel) was formed by crosslinking of the thiolated gelatin and poly (ethylene oxide) diacrylate and the gelation time was determined by inverted method. Finally, the DBM-Gel composite was prepared by mixing Gel and DBM powder. The cytotoxicity was tested by live/dead staining and Alamar blue assay of the encapsulated cells in the DBM-Gel. Forin vitro cell induction, C2C12 cells were firstly incubated onto the surface of the DBM and then the composite was prepared. The experiment included two groups: DBM-Gel and DBM. The alkaline phosphatase (ALP) activity was determined at 1, 3, 5,and 7 days after culture.In vivo osteoinductivity was evaluated using ectopic bone formation model of nude rats. Histological observation and the ALP activity was measured in DBM-Gel and DBM groups at 4 weeks after implantation. Results The thiol content in the thiolated gelatin was (0.51±0.03) mmol/g determined by Ellman method. The gelation time of the hydrogel was (6±1) minutes. DBM powder can be mixed with the hydrogel and injected into the implantation site within the gelation time. The cells in the DBM-Gel exhibited spreading morphology and connected each other in part with increasing culture time. The viability of the cells was 95.4%±1.9%, 97.3%±1.3%, and 96.1%±1.6% at 1, 3, and 7 days after culture, respectively. The relative proliferation was 1.0±0.0, 1.1±0.1, 1.5±0.1, and 1.6±0.1 at 1, 3, 5, and 7 days after culture respectively.In vitro induction showed that the ALP activity of the DBM-Gel group was similar to that of the DBM group, showing no significant difference (P>0.05). With increasing culture time, the ALP activities in both groups increased gradually and the activity at 5 and 7 days was significantly higher than that at 1 and 3 days (P<0.05), while there was no significant difference between at 1 and 3 days, and between 5 and 7 days (P>0.05). At 4 weeks after implantationin vivo, new bone and cartilage were observed, but no bone marrow formation in DBM-Gel group; in DBM group, new bone, new cartilage, and bone marrow formation were observed. The histological osteoinduction scores of DBM-Gel and DBM groups were 4.0 and 4.5, respectively. The ALP activities of DBM-Gel and DBM groups were respectively (119.4±22.7) and (146.7±13.0) μmol/mg protein/min, showing no significant difference (t=–2.085,P=0.082). Conclusion The injectable andin situ gelling gelatin hydrogel for delivery of DBM is feasible.
Objective To summarize recent research advancement on gene therapy for hepatic ischemia-reperfusion injury (IRI). Methods Relevant references about basic and clinical researches of hepatic IRI were collected and reviewed. Results Recent experimental researches indicated that the expression of several genes and cytokines could protect hepatic cells by suppressing cell apoptosis, decreasing the production of oxyradical, remaining and improving portal venous flow, promoting bilifaction, self immunoloregulation and decreasing inflammatory reaction, so that it could decrease IRI. Conclusion IRI could be decreased by regulating the expressing of target genes or transducing relative genes in vivo, but the path of gene transfer and the selection and optimization of gene carrier still need more basic and clinical researches to prove.
Objective To investigate the physicochemicalproperties of the calcium phosphate cement (CPC) containing Danshen composite injection and its drug release rate. Methods This experiment included 4 groups and each group contained 6 specimens. CPC (2 g) was mixed with the setting solution that served as thecontrol group; 0.1,0.5 and 1.0 ml of Danshen composites injection (concentration, 1 000 mg/ml; pH, 7.35) were respectively added to CPC (2 g), which were used as the experimental groups 1, 2 and 3. The resulting specimens were investigated by the X-ray diffraction (XRD), the fourier transformed infrared spectroscopy(FTIR), and the scanning electron microscope (SEM).ResultsThe XRD analysis showed that the control group had a typical diffraction pattern of the hydroxypatite (HAP), which was consistent with the standard patternof HAP. When more Danshen was added in the experimental groups, the diffractionpeaks of HAP gradually decreased; when the diffraction angle 2θ was about 25.92°, the HAP peaks disappeared. Based on the FTIR analysis, with an increase of the drug concentration, the absorption peak of the hydroxy groups decreased. The SEM showed that the size of the CPC particle was related to the drug concentration; with an increase of the drug concentration, the CPC particle increased in number, resulting in an increasing trend of coacervation. The elution test showed that the drugrelease rate and capacity varied with the different concentrationsof Danshen. The initial release rate was relatively great, but after 96 hours the rate slowed down, lasting for a long time. Conclusion The physicochemical properties of CPC do not change when a proper dose (0.1 ml/2 g) of Danshen isadded to CPC. The Danshen composite can be effectively released from CPC, and so CPCcan be used as an ideal drugdelivery carrier for Danshen composite.
OBJECTIVE: To conduct the in vitro test on drug release of rifampin encapsulated in a carrier made of porous phosphate glass ceramics and to analyze main factors which affect the drug release rate. METHODS: A certain quantitative of rifampin was sealed in a hollow cylindrical capsule which consisted of chopped calcium phosphate crystal fiber obtained from glass crystallization. The rifampin concentration was measured in the simulated physiological solution in which the capsule soaked. RESULTS: Rifampin could be released in a constant rate from the porous glass ceramic carrier in a long time. The release rate was dependent on the size of crystal fiber and the wall thickness of the capsule. CONCLUSION: This kind of calcium phosphate glass ceramics can be a candidate of the carrier materials used as long term drug therapy after osteotomy surgery.
Objective To review the progress and clinical application of malleable bone paste/putty. MethodsRecent literature about malleable bone paste/putty was reviewed and analyzed. ResultsThe preparation and clinical application of malleable bone paste/putty have become increasingly mature. Many kinds of malleable bone paste/putty have been applied extensively and the good clinical results have been achieved in the treatment of the irregular bone defects. The materials and methods for preparing malleable bone paste/putty are different. Then they have different bone repair abilities. ConclusionMalleable bone paste/putty provides effective method to treat irregular bone defects. But the malleable bone paste/putty still has some shortage, so further researches should be carried out.
As one of the traditional computer simulation techniques, molecular simulation can intuitively display and quantify molecular structure and explain experimental phenomena from the microscopic molecular level. When the simulation system increases, the amount of calculation will also increase, which will cause a great burden on the simulation system. Coarse-grained molecular dynamics is a method of mesoscopic molecular simulation, which can simplify the molecular structure and improve computational efficiency, as a result, coarse-grained molecular dynamics is often used when simulating macromolecular systems such as drug carrier materials. In this article, we reviewed the recent research results of using coarse-grained molecular dynamics to simulate drug carriers, in order to provide a reference for future pharmaceutical preparation research and accelerate the entry of drug research into the era of precision drug design.
Mesenchymal stem cells (MSCs) are considered as an ideal treatment for multiple diseases including ocular disease. Recent studies have demonstrated that MSCs-derived exosomes have similar functions with MSCs. Exosomes are nanovesicles surrounded by a phospholipid layer that shuttle active cargo between different cells. They are capable of passing the biological barrier and have potentials to be utilized as natural carrier for the ocular drug delivery.
For a long period of time, silk fibroin has been applied in biomedical areas. Along with the development of biotechnology, new functions of silk fibroin are being found and developed. From the suture of surgery to the therapeutic drug and the ordinary tissue engineering frame to high grade frame with drug buffer system, exploitation of silk fibroin is constantly introduced with something new from the old ones. In our review, we summarize the applications of silk fibroin in tissue engineering, drug buffer system and medical care.
Objective To reviewe the research progress of liposomes as antibiotic carriers. Methods Domestic and abroad literature concerning liposomes as antibiotic carriers was reviewed and analyzed thoroughly. Results Liposomes as antibiotic carriers can significantly improve drug distribution, enhance antibacterial activity, and reduce the side effects of antibiotics during treatment. But it also has some problems, such as poor physical and chemical stabilities and low encapsulation efficiency. Conclusion Liposomes as antibiotic carriers can reduce the drug toxicity, improve drug biodistribution, and pharmacokinetics, and bring the dawn to completely curing infections disease.