Objective To compare the biomechanical differences among the five internal fixation modes in treatment of Day type Ⅱ crescent fracture dislocation of pelvis (CFDP), and find an internal fixation mode which was the most consistent with mechanical principles. Methods Based on the pelvic CT data of a healthy adult male volunteer, a Day type Ⅱ CFDP finite element model was established by using Mimics 17.0, ANSYS 12.0-ICEM, Abaqus 2020, and SolidWorks 2012 softwares. After verifying the validity of the finite element model by comparing the anatomical parameters with the three-dimensional reconstruction model and the mechanical validity verification, the fracture and dislocated joint of models were fixed with S1 sacroiliac screw combined with 1 LC-Ⅱ screw (S1+LC-Ⅱ group), S1 sacroiliac screw combined with 2 LC-Ⅱ screws (S1+2LC-Ⅱ group), S1 sacroiliac screw combined with 2 posterior iliac screws (S1+2PIS group), S1 and S2 sacroiliac screws combined with 1 LC-Ⅱ screw (S1+S2+LC-Ⅱ group), S2-alar-iliac (S2AI) screw combined with 1 LC-Ⅱ screw (S2AI+LC-Ⅱ group), respectively. After each internal fixation model was loaded with a force of 600 N in the standing position, the maximum displacement of the crescent fracture fragments, the maximum stress of the internal fixation (the maximum stress of the screw at the ilium fracture and the maximum stress of the screw at the sacroiliac joint), sacroiliac joint displacement, and bone stress distribution around internal fixation were observed in 5 groups. Results The finite element model in this study has been verified to be effective. After loading 600 N stress, there was a certain displacement of the crescent fracture of pelvis in each internal fixation model, among which the S1+LC-Ⅱ group was the largest, the S1+2LC-Ⅱ group and the S1+2PIS group were the smallest. The maximum stress of the internal fixation mainly concentrated at the sacroiliac joint and the fracture line of crescent fracture. The maximum stress of the screw at the sacroiliac joint was the largest in the S1+LC-Ⅱ group and the smallest in the S2AI+LC-Ⅱ group. The maximum stress of the screw at the ilium fracture was the largest in the S1+2PIS group and the smallest in the S1+2LC-Ⅱ group. The displacement of the sacroiliac joint was the largest in the S1+LC-Ⅱ group and the smallest in the S1+S2+LC-Ⅱ group. In each internal fixation model, the maximum stress around the sacroiliac screws concentrated on the contact surface between the screw and the cortical bone, the maximum stress around the screws at the iliac bone concentrated on the cancellous bone of the fracture line, and the maximum stress around the S2AI screw concentrated on the cancellous bone on the iliac side. The maximum bone stress around the screws at the sacroiliac joint was the largest in the S1+LC-Ⅱ group and the smallest in the S2AI+LC-Ⅱ group. The maximum bone stress around the screws at the ilium was the largest in the S1+2PIS group and the smallest in the S1+LC-Ⅱ group. Conclusion For the treatment of Day type Ⅱ CFDP, it is recommended to choose S1 sacroiliac screw combined with 1 LC-Ⅱ screw for internal fixation, which can achieve a firm fixation effect without increasing the number of screws.
ObjectiveTo explore the effect on sagittal spine-pelvis balance of different fusion segments in anterior cervical discectomy and fusion (ACDF).MethodsThe clinical data of 326 patients with cervical spondylotic myelopathy, treated by ACDF between January 2010 and December 2016, was retrospectively analysed. There were 175 males and 151 females with an average age of 56 years (range, 34-81 years). Fusion segments included single segment in 69 cases, double segments in 85 cases, three segments in 90 cases, and four segments in 82 cases. Full spine anterolateral X-ray films were performed before operationand at 12 months after operation. The spine-pelvis parameters of fusion segments were measured and compared. The parameters included C0-2 Cobb angle, C2-7 Cobb angle, C2-7 sagittal vertical axis (C2-7 SVA), T1 slope (T1S), thoracic inlet angle (TIA), thoracic kyphosis (TK), lumbar lordosis (LL), pelvic incidence (PI), sacral slope (SS), C7 sagittal vertical axis (C7 SVA), T1 pelvic angle (TPA). The Japanese Orthopaedic Association (JOA) score of cervical spine and visual analogue scale (VAS) scores of pain of cervical spine and upper extremity were compared before operation and at 12 months after operation. Pearson correlation analysis was performed on LL, PI, SS, C7 SVA, and TPA before and after operation to evaluate the changes of spine-pelvis fitting relationship after ACDF.ResultsAll 326 patients were followed up 12-32 months (mean, 18.5 months). During the follow-up period, internal fixator was in place, and no spinal cord nerve or peripheral soft tissue injury was found. JOA scores and cervical VAS scores improved significantly at 12 months after operation (P<0.05), no significant difference was found in VAS scores of upper extremity when compared with preoperative scores (P>0.05). The preoperative cervical VAS scores and the postoperative JOA scores at 12 months had significant differences between groups (P<0.05). At 12 months after operation, there was no significant difference in sagittal spine-pelvis parameters in the single segment group compared with preoperative ones (P>0.05); but the C0-2 Cobb angle, C2-7 Cobb angle, C2-7 SVA, T1S, TIA, C7 SVA, and TPA in the double segments, three segments, and four segments groups were significant larger than preoperative ones (P<0.05). The C0-2 Cobb angle, C2-7 Cobb angle, T1S, C7 SVA, and TPA among 4 groups had significant differences before operation and at 12 months after operation (P<0.05). At 12 months after operation, the changes of C7 SVA and TPA in the double segments, three segments, and four segments groups were significantly larger than those in the single segment group (P<0.05). PI had positive correlations with LL and SS before and after operation in 4 groups (P<0.05).ConclusionNormal fitting relationship between lumbar spine and pelvis in physiological state also exists in patients with cervical spondylotic myelopathy, and ACDF can not change this specific relationship. In patients with cervical spondylotic myelopathy, the sagittal spine-pelvis sequence do not change after ACDF single-level fusion, while the sagittal spine-pelvis balance change after double-level and multi-level fusion.
We developed a three-dimensional finite element model of the pelvis. According to Letournel methods, we established a pelvis model of T-shaped fracture with its three different fixation systems, i.e. double column reconstruction plates, anterior column plate combined with posterior column screws and anterior column plate combined with quadrilateral area screws. It was found that the pelvic model was effective and could be used to simulate the mechanical behavior of the pelvis. Three fixation systems had great therapeutic effect on the T-shaped fracture. All fixation systems could increase the stiffness of the model, decrease the stress concentration level and decrease the displacement difference along the fracture line. The quadrilateral area screws, which were drilled into cortical bone, could generate beneficial effect on the T-type fracture. Therefore, the third fixation system mentioned above (i.e. the anterior column plate combined with quadrilateral area screws) has the best biomechanical stability to the T-type fracture.
Objective To investigate the effectiveness of TiRobot-assisted minimally invasive treatment for fragility fractures of the pelvis (FFP) in elderly patients. Methods A retrospective analysis was conducted on the clinical data of 176 patients with FFP who were admitted between July 2018 and July 2024 and met the selection criteria. Among them, 95 patients underwent TiRobot-assisted closed reduction and minimally invasive cannulated screw fixation (robot group), while 81 patients underwent traditional open reduction and plate screw fixation (control group). There was no significant differences in baseline data such as gender, age, fracture classification, disease duration, and preoperative visual analogue scale (VAS) pain scores between the two groups (P>0.05). The following parameters were recorded and compared between the two groups, including operation time, intraoperative blood loss, intraoperative transfusion rate, volume of intraoperative blood transfusion, maximum incision length, hospital stay, maximum residual displacement, reduction quality, fracture healing time, incidence of complications, VAS scores, Majeed pelvic function scores, and functional grading. Results All surgeries in both groups successfully completed. The robot group exhibited significantly shorter operation time, reduced intraoperative blood loss, lower intraoperative transfusion rate, smaller volume of intraoperative blood transfusion, shorter maximum incision length, and shorter hospital stay compared to the control group (P<0.05). In the robot group, a total of 14 INFIX internal fixation frames and 280 cannulated screws were implanted, among which 250 screws were rated as excellent, 17 as good, and 13 as poor, resulting in a screw placement excellent and good rate of 95.36%. Radiological review revealed that the excellent and good rate of reduction quality was in 91.58% (87/95) in the robot group and 81.48% (66/81) in the control group, with no significant differences in postoperative maximum residual fracture displacement or reduction quality between the two groups (P>0.05). All patients in both groups were followed up 12-66 months, with an average of 28.9 months, and there was no significant difference in follow-up time between the two groups (P>0.05). The fracture healing time in the robot group was significantly shorter than that in the control group (P<0.05). At last follow-up, both groups showed significant improvement in VAS scores compared to preoperative values (P<0.05); the change values of VAS scores, Majeed scores, and the excellent and good rate of Majeed pelvic function were significantly higher in the robot group than in the control group (P<0.05). Regarding postoperative complications, there was no significant difference between the two groups in terms of gait changes, secondary surgeries, heterotopic ossification, incision infections, walking difficulties, internal fixation failure, or mortality rates (P>0.05); however, the incidence of delayed wound healing was lower in the robot group than in the control group (P<0.05). Conclusion TiRobot-assisted minimally invasive treatment of elderly FFP is superior to traditional open reduction and internal fixation in terms of surgical trauma control, postoperative rehabilitation speed, and functional recovery.